|Product Dimension||13.39*7.68*12.4inches/34*19.5*31.5 cm(L*W*H)|
|Type||No Key Lock, Watch Storage, RGB Light, Remote Control, LED Light Stripe|
|Material||Acrylic, Wood, Velvet Leather, MDF|
|Power Supply||110-240V AC Adapter(CE, UL, ROHS certificate)|
|Package||1 * Device
1 * 110-240V AC Adapter
1 * Clean Cloth
1 * User Manual
1 * Remote Control
1. 2 in1 Functions Combined Design: 6 winder rotors and additional storage for 6 watches.
2. RGB Light: RGB lights with colorful changing, the watch winders makes your watches look gorgeous and mysterious. It is also a good way to show your watches and decorate your rooms.
3. Interior LED Light Stripe: Your watch collection will look stunning in the dark.
4. LCD Touch Screen Panel: Shows all information on the watch winders modes. Touchscreen option and remote control make a setup process much easier.
5. Multiple Rotation Modes Setting: You can set the number of Turns-Per-Day from 300 to 2300 TPD. Two buttons are used to turn up and down, the up button increases by 50 each time, over 300 TPD returns to 2300 TPD cycle.
6. Flexible Cuff and Pillow: The soft pillows and velvet lining prevent watches from scratching. Detachable base to accommodate all wrist sizes without putting pressure on your bracelet.
7. Super Quiet Motors: Adopt Japanese Mabuchi motors, the rotors are very quiet. You can hardly hear them spinning.
Direction: clockwise/counter clockwise/clockwise+counter clockwise
TPD Calculation Method: 10 turns per cycle
24-hour mode operating cycle (minutes) =1440/ (TPD/10 turns);
12-hour mode operating cycle (minutes) =1440/ (TPD/10 turns) /2;
8-hour mode operating cycle (minutes) =1440/ (TPD/10 turns) /3;
e.g: TPD set to 650, clockwise, 24 hours mode. Then the running period (minutes) =22.2, that is, each cycle is 22.2 minutes.
Cycle execution: the time required for the motor to rotate clockwise 10 times + the motor stop time = 22.2 minutes. In the 12 (8 hours) working mode, the cycle runs for 12 (8 hours) hours and then stops; stops for 12 (16 hours) hours, and then restarts the cycle.
There is no magic number of rotations that will wind your watch. Things such as how active you are, how many complications your watch has, how frequently you use the chronograph function, how frequently you wear your watch, the watch make, how long it has been since it was last serviced and a host of other variables will impact what your watch requires to stay wound. And a watch winder won't wind a watch that is fully stopped. So, you need to manually wind the timepiece to get it running first. You will have to make this determination by trying the various settings.
We offer a 1-year warranty from the date of shipment. If a defect arises during the warranty period, first pls email us email@example.com or whatsapp +1 6315455745 , We will work with you to quickly fix the problem, either by repairing, replacing, or refunding the affected product. Whatever you need, we’re here to help. Just get in touch, and we’ll try our best to respond within 24 hours.
This warranty shall not apply to the damages caused by:
(a) The product normal wear, such as increased noise, cuts, scratches, stains, etc;
(b) Improper usage of the product, such as impact, shock, unauthorized intrusion into the product, ect;
(c) Usage in an unsuitable environment, such as moisture, water, vibrations, excessive heat and other damaged elemental;
(d) Any lack of care, accidents and abuse;
(e) Be altered without the official authorization buy us.
What is the correct setting for my watch
All automatic watches have different TPD requirements but on average most automatic watches need a minimum of 650-1200 TPD. All of our watch winders are set to accommodate this minimum requirement.
To find the right setting for your watch we recommend the following procedure:
1) Manually wind the watch by turning the crown 20-30 times. The watch winder will not wind a completely dead watch.
2) Set the winder to the lowest TPD setting and bi-directional rotation. Place the watch in the winder and make sure it is seated properly and securely in the holder.
3) Turn the winder on and periodically check to make sure the time is correct. Most automatics have a maximum of 40 hours of power reserve when fully wound so if the time is correct after 2 full days, this is the proper setting for your watch.
4) If the time is incorrect, please set it to the next highest TPD setting and try again.
5) If the time is incorrect, please set it to clockwise only and try again.
6) If the time is incorrect, please set it to counter-clockwise only and try again.
7) If the watch works while it is being worn but does not work in the winder, it may need to be serviced. When a watch is worn, the movements it experiences are not as smooth as in a watch winder, so while a watch may work when its worn it may not work when in the winder. Watch winders move very smoothly so if the lubrication inside the watch has congealed from not being in use, the watch may need to be serviced.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.